Rectifier Module | DC Power Supply

Iindidi zemveliso

iveliso ezifakiwe

48I-VDC &220I-VDC Modorlal I-Inverter ehambelana ne-Inverter ecocekileyo ye-Sine wave
19 Intshi 110vdc & 220I-VDC ye-vdc ye-inverter ye-Iniler ye-Inilerter I-Inilallel ye-Inverter
I-DC 48V 10000 I-Watt Inverter 10Kva sunjun Wave Sund Inverber Teler telecom I-Teack Ineverter
Inkqubo ye-EARD YOKUGQIBELA I-3U DC 48V 150A Ukutshintsha umbane
Inqanaba lesigaba se-BWITT 48V kwi-AC220V 1000W i-1000W i-snine ye-ineverter ye-1000W i-inverter ene-snver

Qhagamshelana nathi

Ilungelo lokushicilela @ 2025 Shenzhen Bwitt Co., Linqunyelwe
Ifowuni:+86-18820237701
Whatsapp：+86 18822867573
I-imeyile:Inkxaso@bwitt.com.cn
Idilesi:9 / F, Isakhiwo 20, Inzululwazi ye-ASX kunye neTekhnoloji yeMveliso yeMveliso, 19 Indlela ye-pumeng hufeng, I-Zhongkai ephezulu yeTekhnoloji, Isixeko saseHuizhou, IPhondo laseGuangdong

Inkqubo yenkqubo yamandla efakelweyo ye-40A Imodyuli yemodyuli 100 I-AMP 24VDC AC ukuya kwi-DC amandla e-DC kunye nomsebenzi webhetri

Telecom Rectifier System telecom rectifier 48v

Jonga imifanekiso engakumbi

Inkcazo:

RCT-2000 modular rectifier system is widely deployed in the telecom/industrial field. It provide telecom power technology to modulate voltage for DC load and maintain back-up batteries.It treble hot swap rectifier modules build a N+1 redundancy, have high fault tolerant reliablity for important load. To adaptable in different external power system, the powerful monitor have 45 alarm option, support RS485/ SNMP remote operation.

Imodeli：

24/220-30A
24/220-40A
24/220-60A
24/220-100A
24/220-180A
24/220-300A
24/220-360A

- +

Yongeza kwiNgxowa-mali 0

- +

Yongeza kwiNgxowa-mali 0

- +

Yongeza kwiNgxowa-mali 0

Thumela i-imeyile kuthi Nxibelelana ngoku Khuphela njenge-PDF

Iinkcukacha zemveliso

Iiparamitha

Ukubuza ngoku

This type Embedded Power System is widely deployed in the Telecom/Industrial environment today, a new generation “Green & Energy Saving” system, aiming at outdoor low power mobile Telecom/Industrial power market, meeting the trend of Telecom base station development, saving construction cost and shortening time. The system is highly adaptable with environment, features with wide operating temperature range, meeting the demand of high level users.

Izicelo

Ifanelekile amandla onxibelelwano kwi-1-10kw
1. Isikhululo seTeleccom / Isiseko seCable
2. Isikhululo soNxibelelwano.
3. IZiko leDatha leKhompyuter
4. Inethiwekhi ye-Scada kunye nezixhobo zedatha
5. Ifowuni / iselfowuni
6. Izikhululo zerediyo zerediyo / iiseli
7. Igumbi lokubeka iliso
8.Isixhobo se-WiFi Cifi
9. Imoto yoNxibelelwano oluNgxamisekileyo
10. Uloliwe & iMetro
11. Hambisa iinkqubo ze-eriyali
12. Marine & elunxwemeni
13. Iinkqubo zolawulo lokwakha
14. Iinkqubo ze-alarm yomlilo
15. Inkqubo yeNkqubo yeShishini / intsimi
16. Isikhululo samandla / isikhululo
17.Inkqubo yokujonga amandla
18.Inkqubo yamandla elanga
19.Inkqubo yamandla umoya

Izibonelelo zeMveliso

1.Widely operating range of AC input voltage: 90~290Vac n
2.60 amp output per module, 180 amp system capacity max for 2U （Whole system 600 amp max)
3.Perfect battery management, accessory battery temperature detector
4.Current/voltage switching tech with high efficiency: ≥93.2%
5.Temperature compensation, LLVD and BLVD protection
6.Compact 2U 19’ inch rackmount shelf
7.Real-time detection of operating status, sound-light alarm
8.Abnormal log record: input over/ under voltage protection, output over voltage protection, output over current protection,
9.output short circuit protection, over temperature alarm, AC loss alarm etc.

If you have some problems about Embedded Power System 3u dc 48v 150A switching power supply, okanye ufuna ukwazi iinkcukacha ngakumbi malunga ne-rack nyu i-inverter yefowuni,Inkqubo ye-Rectifier Rectifier,Home Pure Sine Wave Inverter,Solar MPPT INVERTER,I-DC ukuya kwi-DC Converter, njl. Wamkelekile ukunxibelelana nathi!

Ukujonga phambili kumbuzo wakho !

Inkqubo ye-EARD YOKUGQIBELA I-3U DC 48V 150A Ukutshintsha umbane

Okulandelayo

I-DC 48V 10000 I-Watt Inverter 10Kva sunjun Wave Sund Inverber Teler telecom I-Teack Ineverter

Thumela umyalezo wakho kuthi:

Ingcebiso yemveliso

Hayi.	Item		Technical Specifications
1	Environmental Requirements	Operating temperature	-40℃~55℃(-40 to +131°F)
		Storage temperature	-45℃~70℃ (-40 to +158°F)
		Relative humidity RH	5%~95%RH（40±2℃，no condensation）
		Atmospheric pressure	62kPa~106kPa
		Altitude	0m~2000m
		Degree of protection	IP20
2	AC Distribution	Input mode	Single phase input
		I-Plowlity voltage	220Gobe
		Uluhlu lwevolthi	90V ~ 290VAC
		Rhoqo	45 Hz ~ 65Hz
		System efficiency	≥93.2% （@230Vac，Peaking）
		System input power factor	≥0.99（@230Vac，full load）
		THD	＜5% （@230Vac，full load）
		System protection function	AC overvoltage& under-voltage protection; DC overvoltage&under- voltage.current limit.short circuit protection; battery and rectifier over temperature protection; automatic restoration happens after the over-voltage.over-current.under-voltage and over-temperature disappear.
3	DC Distribution	System output voltage	Rated output：24VDC
		System output voltage	Adjustable range: 20VDC-30VDC continuously adjustable
		System output current	24V/30A
		System load regulation	≤±0.5%
		System voltage regulation	≤±0.5%
		System stability precision	≤±0.5%
		Current sharing capability	module current sharing not more than ±5％
		Phone balance weight noise	≤2mV（@230Vac，full load）
		Peak-peak noise voltage	≤200mV(0 MHz ~ 20MHz) （@220Vac，half load ~ full load）
		system current limit value	Power system: 1-33A,Note: can be settable continuously
		System voltage drop	At full load. the voltage drop of DC distribution within the rack shall below 500 mV
		Output distribution	Load distribution:3@ 135A Rail Mount Terminal
		Battery distribution	Battery distribution：1*@135A Rail mount Terminal
4	Module And Monitoring Unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
		Rectifier indication	with operation.alarm.and fault indicators
		Soft start time	3s-10s
		rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
		Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
		Monitoring unit	English language in LCD screen of the rectifier,
		Monitoring unit	The parameters can be set through the monitoring unit. with parameter set and power-failure data store functions. Max 1000 Units vents.
		Installation method	Rectifier module support swappable
		Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
		Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
5	Safety	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
		Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA
			Input to enclosures: 3500VDC @1min&leak current ≤10mA
			Output to enclosures:750VDC @1min&leak current ≤10mA
		System leak current	≤3.5mA（2320Vac input）
		Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
		AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Optional)
		EMC	In accordance with EN55022 CLASS A,GB9254 CLASS A,FCC PART15 CLASS A,GB17626-1998,IEC 61000-3-2
6	Batty	Battery low voltage alarm and protection （BLVD）	When DC voltage below battery protection threshold value and there is no AC input. the battery protection alarm.lasting for 1 min.battery protection DC connect cut off.
6	Batty	Battery management function	With battery management function; with the function of the manual or automatic shift of equalized or float charging status of the battery.current limit charging at equalized state; Temperature compensation for the system output voltage,(equalized and float voltage can be adjusted automatically based on 1~2 00（adjustable）mV/cell/℃.the higher the battery temperature.the lower the float voltage.).
7	others	Noise	≤55dB (A) (measured at 1m distance from the equipment)
		MTBF	≥ 100000 hours
		Impact and vibration	1. Can bear impact of peak acceleration 150m/s2 lasting for 11ms
		Impact and vibration	2. Can bear sine wave vibration of frequency (10 ~ 55)Hz and amplitude 0.35mm.
		Material flame retardant performance	1.The flame retardant class of PCB used in system and module controller meet V-0 requirements of GB4943.
			2.UL certificated flame retardant cable is adopted.
			3.The flame retardant class of insulation materials meets V-1 requirements of UL regulations.
8	Mechanical Data	Chassis coating	Meeting damp-proof and corrosion-proof requirements.there is a surface coating on the enclosures. which meets below requirements:
			1. Making the adhesion test in accordance with ISO 2409. reaching 0 class.
			2. Making a pencil hardness test in accordance with ASTM D3363.not less than 2H.
			3. Making impact test in accordance with ASTM D2794.reaching 50kg.cm.
			4. Making salt frog
		Cabinet material	Material: CRCA ; thickness:1.5mm
		Dimensions (W×D×H)	Cabinet: 482mm×410mm×88mm (W×D×H)
		Weight (kg)	Appro: 15kg